HIKVISION TURBO HD DS-2CE56H5T-ITMEB, Руководство пользователя, Страница: 5 / 16

1.2.3 Overview of Type III Camera
Mounting
Base
Tilt Adjusting
Screw
Bubble
Power Cord
12 VDC
Video Cable TVI
IR LED
Photoresistor
Black Liner
Safty Rope
Figure 1-3 Overview of Type III Camera
2 Installation
Before you start:
 Make sure that the device in the package is in good
condition and all the assembly parts are included.

Make sure that all the related equipment is power-off
during the installation.
 Check the specification of the products for the
installation environment.

Check whether the power supply is matched with
your required output to avoid damage.
 Make sure the wall is strong enough to withstand
three times the weight of the camera and the
bracket.
 If the wall is cement, insert expansion screws before
installing the camera. If the wall is wooden, use
self-tapping screw to secure the camera.

If the product does not work properly, contact your
dealer or the nearest service center. Do NOT
disassemble the camera for repair or maintenance by
yourself.
2.1 Installation of Type I Camera
2.1.1 Ceiling/Wall Mounting without Junction Box
Steps:
1.
Disassemble the turret camera by rotating the
camera to align the notch to one of the marks, as
shown in the figure below.
Mark
Notch
Figure 2-1 Disassemble the Camera
2. Remove the mounting base from the camera body
with a flat object, e.g., a coin.
3. Paste the drill template (supplied) to the place
where you want to install the camera.
4. Drill the screw holes and the cable hole (optional)
on the ceiling/wall according to the drill template.