Mark
Notch
Figure 2. 4
Disassemble the Camera
2.
Remove the mounting base from the camera body
with a flat object, e.g., a coin.
3.
Attach the drill template (supplied) to the place
where you want to install the camera, and then drill
the screw holes and the cable hole (optional) on the
ceiling according to the drill template.
Note:
Cable hole is required when adopting the ceiling outlet
to route the cable.
Screw Hole
Cable Hole
Figure 2. 5
Drill Template
4.
Attach the mounting base to the ceiling and secure
them with supplied screws
Figure 2. 6
Attach the Mounting Base to the Ceiling
Note:
In the supplied screw package, both self-tapping
screws and expansion blots are contained.
If the wall is cement, expansion blots are required
to fix the camera. If the wall is wooden,
self-tapping screws are required.
5.
Route the cables through the cable hole (optional),
or the side opening.
6.
Align the camera with the mounting base, and
tighten the screws to secure the camera with the
mounting base.