HD-TVI Speed Dome User Manual
27
and power-up).
Steps:
1.
Move the cursor to enter the PATTERNS submenu:
MAIN MENU > DOME SETTINGS > PATTERNS
PATTERNS
PATTERN NUM 1
RECORD PATTERN
PREVIEW
CLEAR PATTERN
REMAINING 100
BACK EXIT
Figure 3-15
Pattern Configuration Menu
2.
Choose the pattern number.
(1)
Move the cursor to PATTERN NUM and click IRIS+ to enter the editing mode.
(2)
Click the up/down direction buttons to select the number of the pattern which is to be
configured.
(3)
Click IRIS+ again to confirm the settings.
Up to 5 patterns can be configured.
3.
Edit the pattern.
(1)
Move the cursor to RECORD PATTERN and click IRIS+ to enter editing mode.
REMAIN MEMORY 100
DONE OPEN
QUIT CLOSE
Figure 3-16
Edit the Pattern
(2)
Click the PTZ control buttons and direction buttons to operate the speed dome to draw a
movement path, including pan scan, tilt scan, zoom in, zoom out, etc. The speed dome can
automatically memorize the path you operated as a pattern.
(3)
Click IRIS+ again to save the pattern and exit editing mode.
REMAIN MEMORY indicates the remaining memory of the speed dome for configuring the
patterns. When it reaches 0, no more patterns can be configured. You can also see the