HIKVISION PTZ Ultra Series, Руководство пользователя, Страница: 88 / 139

Figure 5-45 Advanced Face Capture Parameters
Following parameters can be configured on this interface:

Generation Speed: The speed to identify a target can be set by adjusting the slider, ranging
from 1 to 5. The higher the value is, the faster the target will be recognized. The default
value is recommended.

Sensitivity: The sensitivity to identify a target can be set by adjusting the slider, ranging from
1 to 5. The higher the value is, the easier a face will be detected, and the higher possibility of
misinformation would be. The default value of 3 is recommended.
 Face Capture Mode: Best Shot and Quick Shot are available.

Best Shot stands for the best picture after the target leaving the detection area.

Capture Times: Refers to the capture times a face will be captured during its stay
in the detection area.

Capture Interval: The frame interval to capture a picture. If you set the value as
1(default), it means the camera captures the face in every frame.
 Capture Threshold: It stands for the quality of face to trigger capture and alarm.
Higher value means better quality should be met to trigger capture and alarm.

Quick Shot: You can define quick shot threshold and max. capture interval.

Quick Shot Threshold: It stands for the quality of face to trigger quick shot.
 Max. Capture Interval: It describes the max. time occupation for one quick shot.
 Capture Times: Refers to the capture times a face will be captured during its stay