Network PTZ Camera
·
Quick Start Guide
18
Note:
Do not touch the bubble directly with your hands. Otherwise,
the image may blur.
2.4.3
Corner Mounting
Before you start:
You need to prepare the corner mounting bracket and the wall
mounting bracket first.
Steps:
1.
Install the corner mounting bracket.
1)
Drill four Φ12 holes, and insert four M8 screws.
2)
Route the cables from the corner mounting bracket, and fix
the bracket with four flat washers and four hex nuts, as
shown in Figure 2-17.
Figure 2-17
Install the Corner Mounting Bracket
2.
Install the wall mounting bracket and the camera on the corner
mounting bracket. Refer to section
2.4.2 Wall Mounting
.