HIKVISION PanoVu Mini Series, Руководство пользователя, Страница: 47 / 103

User Manual of Network PTZ Camera
© Hikvision
39
5.2.3 Configuring Alarm Input
Note:
This function varies depending on different camera models.
Steps:
1.
Enter the Alarm Input settings interface:
Configuration > Event > Basic Event > Alarm Input
2. Choose the Alarm Input No. and the Alarm Type. The alarm type can be NO (Normally Open)
and NC (Normally Closed).
3. Edit the name in to set a name for the
alarm input (optional).
Figure 5-15 Alarm Input Settings
4. Click tab to enter the arming schedule setting interface. The arming
schedule configuration is the same as the setting of the arming schedule for motion detection.
Refer to Section 5.2.1 Configuring Motion Detection.
5. Click tab to select the linkage method taken for tampering, notify
surveillance center, and send email are selectable. Refer to Section 5.2.1 Configuring Motion
Detection.
6. You can also choose the PTZ linking for the alarm input. Check the relative checkbox and
select the No. to enable Preset Calling, Patrol Calling or Pattern Calling.
7. You can copy your settings to other alarm inputs.
8. Click to save the settings.