Network PTZ Camera
·
Quick Start Guide
40
40
21
2
Ø
Figure 2-44
Drill Template
3.
Align the cable holes of the base plate to the cable holes of the
in-ceiling bracket and then fix the base plate onto the bracket with
the four screws in the package (supplied), as shown below.
Figure 2-45
Fix the Base Plate to In-ceiling Bracket
4.
Connect the cables and route the cables through the cable hole.
5.
Align the PTZ camera with the base plate. Rotate the PTZ camera
clockwise into the base plate, and the PTZ camera is secured with
the base plate by three locks on the plate.
6.
Fix the screws on the side with a screwdriver, as shown below.