MinMoe Temperature Screening Terminal Installation Guide
Mercury SD Product Support Team
6
4.3 Site survey
Installation site survey
Project Name
Note
Entrance Name
1
Installation environment (Indoor,
outdoor)
Photos and videos for
site
2
Power supply and network cable
(surface installation or bury in the
tube)
3
Device installation method
（
surface
or with stand
）
Note:
1)
Take more pictures or record videos for the installation site and ground, pictures and videos for every installation
site should be provided.
5. Installation and configuration
5.1 Temperature screening face recognition terminal
5.1.1 Device installation with floor stand
DS-KAB671-B (optional)
DS-K1T671TM-3XF can be installed for temporary (without install expansion screw), or fixed on the ground with
optional floor stand DS-KAB671-B, instruction as below:
1.
Unscrew the two screws on the side of the bottom cover and remove;
2.
Install the expansion screws in the package into the holes at the bottom. Make sure the expansion screw is
slightly above the ground and secure it with the expansion nut;
3.
Move back the bottom cover and screw back the two screws on the side.
