Network Mini Dome Camera
·
Quick Start Guide
12
12
No.
Description
9
Audio/Alarm Cables (Supported by Type II camera)
10
Wi-Fi Antenna
11
Hex Screw
12
MIC
13
RESET/WPS Button(Supported by Type II camera)
Press RESET about 10s when the camera is powering on or
rebooting to restore the default settings, including the user
name, password, IP address, port No., etc.
No.9 is the audio/alarm cable interface, of which the “I” mark
connects to the alarm input, the “o” mark connects to the
alarm output, the “GND” mark connects the grounding, and the
“A” mark connects the audio output.
WPS (Wi-Fi Protected Setup, also known as AOSS or QSS) is a
computing standard that attempts to allow easy establishment
of a secure wireless network. Refer to user manual for details.
A wireless router with the WPS function is required to enable
the WPS function of the camera. Refer the steps below.
Steps:
Press the WPS button on the router.
1.