User Manual of Network Traffic Camera revise
55
extent.
6.
Select
3D DNR
.
1)
If you select
Normal Mode
, adjust
3D DNR Level
from 0 to 100.
2)
If you select
Expert Mode
, adjust
Spatial Intensity
and
Time Intensity
from 0 to 100.
7.
(Optional) Check
2D DNR
, and adjust
2D DNR Level
from 0 to 100.
8.
(Optional) Check
Slow Shutter
and select slow shutter level.
In slow shutter mode, the shutter speed will automatically decrease in low
illumination conditions to maintain clear video images by increasing the exposure
time. Higher level means lower shutter speed.
9.
Select Video Standard, 50Hz and 60Hz are selectable. Choose according to the
different video standards; normally 50 Hz for PAL standard and 60 Hz for NTSC
standard.
10.
(Optional) Click
Capture Test
to test the effects.
12.3
Configuring Picture
Purpose:
The camera supports dual-shutter. One shutter for video image and the other one for
captured image. You can configure shutter parameters for captured image.
Steps:
1.
Go to
Configuration
>
Device Configuration
>
Image Parameters
>
Picture
.