HIKVISION iDS-TCE507-BR/1550 Скачать руководство пользователя страница 61

Страница: 61 / 67

3. Click Upgrade.
4. Click OK in the popup window.

Note

The upgrade process will take 1 to 10 minutes. Do not cut off the power supply.

Result
The device will reboot automatically after upgrade.

10.5 Reboot

When the device needs to be rebooted, reboot it via the software instead of cutting off the power

directly.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance → Device

Maintenance .

2. Click Reboot.
3. Click OK to reboot the device.

Note

You can also click Restart on the upper right corner of the page to reboot the device.

10.6 Restore Parameters

When the device is abnormal caused by the incorrect set parameters, you can restore the

parameters.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance → Device

Maintenance .

2. Select the restoration mode.

Click Restore, and select the parameters to be saved instead of being restored. Click OK. Then

the parameters except the IP parameters, user parameters, and the saved parameters will be

restored to the default settings.

Click Restore Factory Settings and click OK to restore all the parameters to the factory

settings.

3. Click OK.

10.7 Synchronize Time

Synchronize the device time when it is inconsistent with the actual time.

Network Traffic Camera Operation Manual

Содержание iDS-TCE507-BR/1550




































































Результаты поиска

Содержание iDS-TCE507-BR/1550

Отзывы:

HIKVISION iDS-TCE507-BR/1550, Руководство по эксплуатации, Страница: 61 / 67

Результаты поиска

Содержание iDS-TCE507-BR/1550

Отзывы: