HIKVISION iDS-TCE500-B, Руководство по эксплуатации, Страница: 28 / 68

Figure 4-3 Set SDK Listening
2. Set IP Address/Domain and Port if you need to upload the alarm information and pictures.
3. Optional: Enable the picture uploading listening if you need to upload image information.
4. Select Protocol Type.
Note
Supported functions vary with different models. The actual device prevails.
License Plate Upload Protocol
Uploads arming alarm images of the license plate. You can enable Upload Binary Image if you
need to upload images which are full of black or white pixel points. Enable Output Binary
Image in BMP Format if you want to output images in this format.
Mixed Target Upload Protocol
Uploads images of multiple targets such as humans and vehicles. You can enable the body
property to recognize clothes, bags, and other properties.
5. Optional: If you want to save the alarm information and pictures to the cloud storage, click to
set Cloud Storage. Refer to Set Cloud Storage for details.
6. Click Save.
4.1.4 Set Arm Host
The device can upload the captured pictures via the arm host.
Steps
Note
For level 1 arm, the pictures can be uploaded normally. If uploading failed, the device will upload
again. For level 2 arm, the pictures will be uploaded once. No more upload if uploading failed. For
level 3 arm, pictures will not be uploaded.
1. Go to Configuration → Network → Data Connection → Arming .
Network Traffic Camera Operation Manual
16