HIKVISION iDS-2CD8A46G0-IZHS Скачать руководство пользователя страница 144

Страница: 144 / 211

Network Camera User Manual

143

Region Exiting Detection

Check Enable checkbox to enable the function.

Select the Region from the drop-down list for detection settings.

Set the Max. Size and Min. Size for valid targets. Targets smaller or larger than the

valid target size are not able to trigger detection.

Max. Size: The maximum size of a valid target. Targets with larger sizes would not

trigger detection.

Min. Size: The minimum size of a valid target. Targets with smaller sizes would

not trigger detection.

Set the detection area. Click on the live video to specify the four vertexes of the

detection region, and right click to complete drawing.

Select the detection target. Human and vehicle are available. If the detection

target is not selected, all the detected targets will be reported, including the

human and vehicle.

Drag the slider to set the sensitivity value.

Sensitivity: Range [1-100]. Sensitivity stands for the percentage of the body part

Содержание iDS-2CD8A46G0-IZHS




















































































































































































































Результаты поиска

Содержание iDS-2CD8A46G0-IZHS

Отзывы:

HIKVISION iDS-2CD8A46G0-IZHS, Руководство пользователя, Страница: 144 / 211

Результаты поиска

Содержание iDS-2CD8A46G0-IZHS

Отзывы: