HIKVISION IDS-2CD7A46G0-IZHSY 8-32, Руководство пользователя, Страница: 47 / 90

Network Camera User Manual
UM Network Camera 072221NA 47
• Detection Target : Human and vehicle are available. If the detection target is not selected, all
detected targets will be reported, including humans and vehicles.
• Target Validity : If you set a higher validity, the required target features should be more obvious, and
the alarm accuracy would be higher. A target with less obvious features would be missed.
Figure 3, Set Rule
5. Optional
:
Set the parameters of multiple areas by repeating the above steps.
6. For arming schedule settings, refer to
Set Arming Schedule
. For linkage method settings, refer to
Linkage Method Settings.
7. Click Save .
Set Line Crossing Detection
Detects objects crossing a pre-defined virtual line. If it occurs, the device can take linkage actions.
Steps
1. Go to Configuration → Event → Smart Event → Line Crossing Detection .
2. Check
Enable
.
3. Select one Line and set the size filter. For the size filter settings, refer to Set Size Filter.
4. Click Draw Area and a line with an arrow appears in the live video. Drag the line to the location on the
live video as desired.
5. Set rules.
•
Direction
: The direction from which the object goes across the line.
­ A<->B : An object crossing the line from either direction is detected and alarms are triggered.