iDS-2CD7046G0-AP Network Box Camera Quick Start Guide
QSG iDS-2CD7046G0-AP 022321NA
5
•
The sensor may be burned out by a laser beam, so when any laser equipment is in use, make sure that
the sensor surface will not be exposed to the laser beam.
•
Do not place the camera in extremely hot, cold (the operating temperature shall be -30° to +60°C (-22°
to 140° F)), dusty or damp locations, and do not expose it to high electromagnetic radiation.
•
To avoid heat accumulation, good ventilation is required for operating environment.
•
Keep the camera away from liquid while in use.
•
While in delivery, the camera shall be packed in its original packing or packing of the same texture.
•
Regular part replacement: a few equipment parts (e.g., electrolytic capacitor) shall be replaced
regularly according to their average enduring time. The average time varies because of differences
between operating environment and usage history, so regular checking is recommended for all users.
Please contact your dealer for more details.
•
This equipment is not suitable for use in locations where children are likely to be present.
•
CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions
ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE BATTERIE DE TYPE INCORRECT.
METTRE AU REBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS
•
Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the
case of some lithium battery types).
•
Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which
may result in an explosion.
•
Do not leave the battery in an extremely high temperature surrounding environment, which may result
in an explosion or the leakage of flammable liquid or gas.
•
Do not subject the battery to extremely low air pressure, which may result in an explosion or the
leakage of flammable liquid or gas.
•
If the product does not work properly, contact your dealer or the nearest service center. Never attempt
to disassemble the camera yourself. (We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.)