HIKVISION HVI-S, Руководство пользователя

Страница: 42 / 65

Hikvision USA, Inc. – Series DS-7300 User Manual
42
Managing User Accounts
By default, your DVR comes with one user account, the Administrator account. The Administrator user name is
admin and the password is 12345. The default password for Administrator should be changed right away for
security reasons. The Administrator has the authority to add, delete or configure parameters for many of the
system functions..
Adding a New Remote User
You may add up to 31 new remote users to your DVR. To add new remote users:
1. Enter the Remote User Settings menu, shown in Figure 38 by going to Main Menu > System Configuration >
Remote User Settings.
Figure 38. Remote User Settings Menu
2. Under Remote Users List, click on Select this entry to add new user.
3. Once a new entry has been selected, the fields under Users will become editable. Enter the information for
Name, Password and Verify.
4. In the Remote Permissions panel select the functions that you would like to give the user access to remotely.
You may also check the All checkbox to give full control to the selected remote user. These functions include:
• Log Search:
View logs that are saved on the DVR.
• Serial Port Control:
Configure settings for RS232 and RS485 ports.
• Two -Way Audio:
Ability to use two-way radio between the remote client and the DVR.
• Advanced Control:
Manage hard disk drives (initializing and setting properties for HDDs). Ability to remote
update system firmware and stop ping of the relay output.
• Live View:
Access the Live Feed.
• PTZ Control:
Control PTZ cameras.
• Configuration:
Configure parameters, restore parameters to factory defaults and import settings to as well
as export settings from DVR.
• Video Output Control:
Configure settings for video output.
• Alarm Control:
Alert or control the relay output of the DVR. Alarm and exception settings must be
configured properly to upload to host.
• Shutdown/Rebo ot:
Shutdown or reboot the DVR.
• Playback:
Playback recordings remotely.
• Camera Management:
Enable and disable analog channels.
• All:
Full permission to use all functions.
5. Click the Save button to save user settings and click Done to return to the previous menu.
Note:
If you forget the password to your DVR, contact your supplier with the serial
number of your DVR to obtain a secure code to reset your DVR.