HIKVISION HiWatch HWI-B121H-M, Руководство пользователя, Страница: 157 / 178

Network Camera User Manual
156
The Post-record time can be configured as 5s, 10s, 30s, 1 min, 2 min, 5 min or
10 min.

Stream Type: Select the stream type for recording.
Note: The record parameter configurations vary depending on the camera model.
4.
Select a Record Type . The record type can be Continuous, Motion Detection,
Alarm, Motion | Alarm, Motion & Alarm, and Event.

Continuous
If you select Continuous , the video will be recorded automatically according
to the time of the schedule.

Record Triggered by Motion Detection
If you select Motion Detection , the video will be recorded when the motion is
detected.
Besides configuring the recording schedule, you have to set the motion
detection area and check the checkbox of Trigger Channel in the Linkage
Method of Motion Detection Settings interface. For detailed information,
please refer to the Task 1: Set the Motion Detection Area in the Section
10.1.1 .

Record Triggered by Alarm
If you select Alarm , the video will be recorded when the alarm is triggered
via the external alarm input channels.
Besides configuring the recording schedule, you have to set the Alarm Type
and check the checkbox of Trigger Channel in the Linkage Method of
Alarm Input Settings interface. For detailed information, please refer to
Section 10.1.3 .

Record Triggered by Motion & Alarm
If you select Motion & Alarm , the video will be recorded when the motion
and alarm are triggered at the same time.
Besides configuring the recording schedule, you have to configure the settings
on the Motion Detection and Alarm Input Settings interfaces. Please refer to
Section 10.1.1 .and Section 10.1.3 for detailed information .