HIKVISION EPI-4225I-DE, Быстрый старт, Страница: 22 / 24

QSG EP I-4225I-DE 030518NA 22
4. Check the Enable checkbox.
5. Click and read the “Terms of Service” and “Privacy Policy” in the pop-up window.
6. Create or change the verification code for the camera.
Note:
A verification code is required when you add the camera to Hik-Connect.
7. Save the settings.
5.3 Add Camera to Hik-Connect
Before You Start:
Enable Hik-Connect on the camera before adding it to your Hik-Connect account. See
Chapter 5.1.
Steps:
1. Use a network cable to connect camera to a router if the camera does not support
Wi-Fi.
Figure 5-3
Connect a Router
Note:
After the camera connects to the network, wait one minute before using the camera
with Hik-Connect.
2. Add the camera to the Hik-Connect app:
•
If Accessing the Camera through an NVR:
T
ap “+” on the upper-right corner and
scan the QR code that appears in the NVR interface.
•
If Accessing the Camera through a Web Browser:
Tap the icon and type in the
camera’s serial number.
3. Input your camera’s verification code.
Note:
The required verification code is created or changed when you enable Hik-Connect on
your camera.
Forgotten verification codes can be recovered in the Platform Access configuration
page via the web browser.
4. Follow prompts to set up the network connection and add the camera to your
Hik-Connect account.
Note:
For detailed information, refer to the Hik-Connect user manual.