ECI-T24Fx Quick Start Guide
QSG ECI-T24Fx 041018NA
5
●
Do not touch sensor modules with fingers. If cleaning is necessary, use clean cloth with
a bit of ethanol and wipe it gently. If the camera will not be used for an extended period,
please replace the lens cap to protect the sensor from dirt.
●
Do not aim the camera at the sun or extra bright places. Blooming or smearing may
occur otherwise (which is not a malfunction), and affect the endurance of sensor at the
same time.
●
The sensor may be burned out by a laser beam, so when any laser equipment is in using,
make sure that the surface of sensor will not be exposed to the laser beam.
●
Do not place the camera in extremely hot, cold (the operating temperature shall be -10°
to 40° C), dusty or damp locations, and do not expose it to high electromagnetic
radiation.
●
To avoid heat accumulation, good ventilation is required for operating environment.
●
Keep the camera away from liquid while in use.
●
While in delivery, the camera shall be packed in its original packing, or packing of the
same texture.
●
Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment
shall be replaced regularly according to their average enduring time. The average time
varies because of differences between operating environment and using history, so
regular checking is recommended for all the users. Please contact with your dealer for
more details.
●
Improper use or replacement of the battery may result in hazard of explosion. Replace
with the same or equivalent type only. Dispose of used batteries according to the
instructions provided by the battery manufacturer.
●
If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)