HIKVISION DY5 Series, Быстрый старт

Страница: 30 / 34

Network Positioning System
·
Quick Start Guide
29
5 Operating via Hik-Connect App
Purpose:
Hik-Connect is an application for mobile devices. With the App, you can view live
image of the positioning system, receive alarm notification and so on.
Note:
Hik-Connect service is not supported by certain positioning system models.
5.1 Enable Hik-Connect Service on Positioning System
Purpose:
Hik-Connect service should be enabled on your positioning system before using the
service.
You can enable the service through SADP software or web browser.
5.1.1 Enable Hik-Connect Service via SADP Software
Steps:
1.
Check the Enable Hik-Connect checkbox on:
1)
"Activate the Device" page during positioning system activation, refer to
section 3.2.2 Activation via SADP Software.
2) Or "Modify Network Parameters" page during modifying IP address, refer to
section 3.3 Modifying the IP Address.
2. Create a verification code or change the verification code.
Figure 5-1 Verification Code Setting (SADP)
Note:
The verification code is required when you add the positioning system to
Hik-Connect app.