HIKVISION DY5 Series, Быстрый старт

Страница: 26 / 34

Network Positioning System
·
Quick Start Guide
25
Note:
You can check whether the activation is completed on the popup window. If
activation failed, make sure that the password meets the requirement and try again.
3.3 Modifying the IP Address
Purpose:
To view and configure the network positioning system via LAN (Local Area Network), you
need to connect the positioning system in the same subnet with your PC. Then, install
the SADP software or client software to search and change the IP address of network
positioning system. We will take modifying the IP address via SADP software as an
example to introduce the IP address modification.
Note:
For IP address modification via client software, refer to the user manual of client
software.
Steps:
1.
Run the SADP software.
2. Select an active device.
3. Change the device IP address to the same subnet with your computer by either
modifying the IP address manually or checking the Enable DHCP checkbox.
Figure 3-5 Modify the IP Address