User Manual of DS-TRI4XX-X Series Bluetooth Card Reader
11
3.4 Switching Wiegand 26/34
Step 1
After entering configuration mode, press S2 button until LED
flashes.
Step 2
Press S1 button to switch between Wiegand 26 or 34: Wiegand 26 is enabled when the light
is on, and Wiegand 34 is enabled when the light is off. Wiegand 26 is enabled by default.
3.5 Switching Active/Passive RS-485 Upload
Step 1
After entering configuration mode, press S2 button until LED
flashes.
Step 2
Press S1 button to switch between active or passive RS-485 upload mode: active RS-485
upload is enabled if the light is on, and passive RS-485 upload is enabled if the light is off.
Passive RS-485 upload is enabled by default.
3.6 Setting Device Code
Step 1
After entering configuration mode, press S2 button until LED
flashes.
Step 2
Press S1 button to set device code, for example, pressing S1 button 5 times to set the device
code to 5, and wait for 5 buzzes to indicate the code is set.
The code can be set from 1 to 15. The default setting is 1.
0100001070213
