6
Specification
The keypad technical specification is shown as follows.
4
Reset
Hold the
Tamper Switch
and turn on the power until the
LED flashes red 3 times.
Simple Mode
Arm
The keypad is diarmed.
A short tag swiping (<3 s) to away arm.
A long tag swiping (
≥
3 s) to stay arm.
Disarm
The keypad is armed.
A short tag swiping (<3 s) to disarm.
Note:
1. A single swiping interval needs to be longer than 3 s. Multiple swipings within 3 s count as one time.
2. Simple mode does not support arming process.
Settings
User Management:
Add/Edit/Delete users.
Tag Managment:
Add/Edit/Delete tags.
Restore Alarm:
Confirm alarm or restore tamper of the control panel. (Only when the control panel supports and enables
PD6662.
Only installer has this permission.
)
Company/Telephone:
Edit company name and telephone number.
Control Panel Lock/Unlock:
One-push to lock or unlock the control panel. (
Only installer has this permission.)
Bypass/Restore Bypass:
Bypass/Restore bypass zones.
WE Series
WB Series
Wireless technology
RF frequency
868 MHz
433 MHz
RF modulation
RF distance
1200 m (open area)
800 m (open area)
LED indicatior
Buzzer
Power switch
Tamper-proof
Serial port
Tag reader built-in
Numeric key
System fault display
System status display
Operation
Configuration
Power consumption
Battery type
Battery life span
Operation temperature
Operation humidity
Color
Installation method
Dimension (W × H × D)
Weight
–10°C to 55°C
10% to 90%
White
Wall-mounting
With batteries: 348 g
Without batteries: 282 g
174.63 mm × 109.62 mm × 25.25 mm
Standby time more than two years
Four CR123 batteries
Quiescent current: 80 uA
Max current: 300 mA
Voltage: 3 V
Tri-X, two-way communication
2GFSK
Fault (orange), enrollment/signal (red/green),
arm (blue), disarm (green), alarm (red)
Supported
Power on/off
Supported, front and rear
3
Supported
Number key: 0 to 9
Function key: *, #, query, away arm, stay arm,
disarm, output, settings, right, left
Supported
Supported
Supported
Supported
Other
Model
RF
Interface
LCD Display
Electrical &
Battery
