2
Indication
3
Enrollment
4
Installation
Enrollment
Wake up with Fault
LED Indication Description
Buzzer Description
Armed
Wake up while armed
Disarmed
Arming Failed
Disarming Failed
Operation completed: Beep twice
Operation failed: Beep three times
Solid orange for 10 s .
Solid blue for 5 s
Solid blue for 10 s
Green flashes 2 times
Blue turns Off
Green turns Off
Tampering Alarm
No Alarm
Event Alarm
Note: Event Alarm Priority > Tampering Alarm Priority
Solid red
Off
Flashing red
Off
No Fault
Signal
Strength
Find Me
Power On
Back Light
-If the keypad is not enrolled to the control panel, the back light is off.
-It turns off when there is no key operation for more than 10 s.
Note: The additional force shall be equal to three times the weight of the equipment but not less than 50N. The equipment
and its associated mounting means shall remain secure during the installation. After the installation, the equipment, including
any associated mounting plate, shall not be damaged.
Enroll the Peripheral Locally
Enroll the Peripheral with QR Code or Serial No.
1. In the APP, tap the "Enrollment Mode" button on the control panel page to make the control panel enter the enroll-
ment status.
2.
Push the power switch of the peripheral to on, and it will be automatically enrolled to the control panel
.
1. In the APP, tap the icon "+"and scan the QR code or enter the serial No. on the peripheral.
2.
Push the power switch of the peripheral to on, and it will be automatically enrolled to the control panel.
1. Remove the screw on the bottom of the keypad.
2. Disassemble the keypad and remove the rear panel.
3. Power on the security control panel.
4. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. to add the control panel.
5. Enroll the peripheral locally, with OR code, or with serial No..
Remove the screw on the bottom of the keypad.
Disassemble the keypad and remove the rear panel.
Scan the QR code on the rear panel of the keypad. Push the power switch to ON.
Check signal strength and select installation place
Enter the signal checking mode by operating on the control panel.
Continual green (3 s) and off (3 s): Strong
Continual green and red (3 s) and off (3 s): Medium
Continual Red (3 s) and off (3 s): Weak
Continual flashing red (3 s) and off (3 s): Lost
Continual green (3 s) and off (3 s): Strong
Continual green and red (3 s) and off (3 s): Medium
Continual Red (3 s) and off (3 s): Weak
Continual flashing red (3 s) and off (3 s): Lost
Flashing red and green: Enrolling
Green flashes 7 times: Enrolled
Enrolled: Solid green for 1 s: Powered on
Flashing red: Operating
Turns off when over time (3 min)
or control panel power off
-The back light is on by default, you can set the On/Off schedule on the web
client of the control panel. Refer to the user manual of control panel for
details.
2
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
