Network Portable IR Speed Dome Quick Start Guide
23
4.2
Activate via SADP Software
SADP software is used for detecting the online device, activating the device, and
resetting the password.
Get the SADP software from the supplied disk or the official website, and install the
SADP according to the prompts. Follow the steps to activate the speed dome.
Steps:
1.
Run the SADP software to search the online devices.
2.
Check the device status from the device list, and select an inactive device.
Figure 4-2
SADP Interface
3.
Create a password and input the password in the password field, and confirm it.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a
strong password of your own choosing (using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security
of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or
weekly can better protect your product.
4.
Click Activate to activate the speed dome.
5.
Change the device IP address to the same subnet with your PC by either modifying
the IP address manually or checking Enable DHCP.