manualshive.com logo in svg

HIKVISION DS-KD8003-IME2, Руководство по настройке, Страница: 37 / 51

Поделиться
Скачать
HIKVISION DS-KD8003-IME2 Скачать руководство пользователя страница 37

Note

•

The person information, including person details, person's fingerprint

information (if configured), and the linked card (if configured), will be

imported to the selected organization.

•

If the person name stored in the device is empty, the person name will be

filled with the issued card No. after importing to the client.

•

The gender of the persons will be Male by default.

Modify and Delete Person

To modify the person information and attendance rule, click   or   in the

Operation column, or select the person and click Modify to open the editing person

dialog.
You can click   to view the person's card swiping records.
To delete the person, select a person and click Delete to delete it.

Note

If a card is issued to the current person, the linkage will be invalid after the person is

deleted.

Change Person to Other Organization

You can move the person to another organization if needed.
Steps
1. Select the person in the list and click Change Organization.
2. Select the organization to move the person to.
3. Click OK to save the settings.

Set Access Group to Assign Access Authorization to Persons

After adding the person and configuring the person's credentials, you can call

contacts via display module.

Module Door Station Configuration Guide

29

Содержание DS-KD8003-IME2




















































Отзывы:

Нет отзывов