Connect to
Ethernet
Reserved
Reserved
Connect to
Power
Supply
Reserved
3
5
2
m
m
3
5
3
m
m
2
8
9
m
m
185 mm
270 mm
272 mm
Visitor
Screen
Supplement Light
Supplement
Light
Operator Screen
Thermographic
Module
Camera
Bottom Camera
Power Switch
Indicator for
Card Presenting
Card
Presenting
Area
The figures are for reference only.
Reserved Reserved
Reserved
USB2.0
USB2.0
Network
Interface
Power Interface
DS-K5032-3XFD Visitor Terminal
Quick Start Guide
UD20442B-A
Direct Sunlight
Direct Sunlight
through Window
Back Light
Indirect Sunlight
through Window
Close to Light
Steps:
1. Put the device on the surface.
This equipment is suitable for mounting on
concrete or other non-combustible surface only.
2. Plug the power supply in the power interface.
3. Press the power switch to power on the device.
The device will enter the main page after powering
on.
If required, you can connect the device with the
network.
1
2
Wiring
3
Installation
©2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without
notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://
www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
Trademarks
and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS
FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE
TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR
OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT
TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-
ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT
IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS
PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Data Protection
During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision
devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is
stored in your device with encryption method; for fingerprint device, only fingerprint template will be saved, which is impossible
to reconstruct a fingerprint image.
As data controller, you are advised to collect, store, process and transfer data in accordance with the applicable data protection
laws and regulations, including without limitation, conducting security controls to safeguard personal data, such as,
implementing reasonable administrative and physical security controls, conduct periodic reviews and assessments of the
effectiveness of your security controls.
Scan the QR code to get the user manual for detailed information.
Note that mobile data charges may apply if Wi-Fi is unavailable.
Installation Environment:
Avoid backlight, direct sunlight, and indirect sunlight.
For better recognition, there should be light source in or near the
installation environment.
Temperature Measurement Environment:
Sunlight, wind, hot/cool air from air conditioner and other external
factors, which may affect surface temperature, will create the
deviation of the temperature measurement. In order to get an
accurate result, make sure the device is applied indoors and windlessly
(where is relatively isolated from the outdoors). The working
temperature should keep between 10 °C and 35 °C. If there are no
suitable environments for temperature measurement (the area faces
the indoor and connects the outdoor, the area at the door of the
indoor environment, etc.), building a temporary temperature
measurement environment is suggested.
Influence Factors of Temperature Measurement:
Wind:
The wind will take the heat away, which may affect the
measurement result.
Sweat:
The sweat will take the heat away, which may affect the
measurement result.
Air Conditioner (Cool Air):
If the indoor temperature is low, the
surface temperature may also lower than the actual temperature,
which may affect the measurement result.
Air Conditioner (Heat) or Heating:
If the indoor temperature is high,
the surface temperature may also higher than the actual temperature,
which may affect the measurement result.
In order to make the device work properly, you should wait for 90 min
after the device is powered on.
Appearance and Component
Connect to
Peripheral
Device
Connect to
Peripheral
Device