manualshive.com logo in svg

HIKVISION DS-K3G501 Series, Быстрый старт, Страница: 30 / 43

Поделиться
Скачать
HIKVISION DS-K3G501 Series Скачать руководство пользователя страница 30

Note

• You can also pair the keyfob via the client software. For details, see Managing Keyfob in User

Manual of iVMS-4200 AC Client Software.

• Only one turnstile can pair the keyfob. If multiple turnstiles are in the pairing mode, the

keyfob will select only one of them to pair.

• For details about DIP switch value and meaning, see DIP Switch .

4.2 Initialize Device

Steps

1. Remove the jumper cap of initialization pin on the main control board.

Figure 4-1 Initialization Jumper Cap

2. Disconnect the power and reboot the device. The device buzzer buzzes a long beep.

3. When the beep stopped, plug the jumper cap back.

4. Disconnect the power and power on the device again.

Caution

The initialization of the device will restore all the parameters to the default setting and all the

device events are deleted.

Note

Make sure no persons are in the lane when powering on the device.

DS-K3G501 Series Tripod Turnstile Quick Start Guide

20

Содержание DS-K3G501 Series












































Отзывы:

Нет отзывов