HIKVISION DS-K3G501 Series, Быстрый старт, Страница: 37 / 43

Appendix B. DIP Switch
B.1 DIP Switch Description
The DIP switch is on the master lane control board. No.1 to No 8 is from the low bit to the high bit.
When the switch is towards ON, it means the switch is enabled, otherwise, the switch is off. If you
set the DIP switch like the figure displayed below, its binary value is 00001100, and its decimal
value is 12.
B.2 DIP Switch Corresponded Functions
The 8-bit DIP switch corresponded functions on the main controller are as follows:
Bit Device Mode Function Decimal Value Binary Value
1 to 2 Work Mode Normal Mode 0 00
3 Memory Mode Enable Memory
Mode
0 0
Disable Memory
Mode
1 1
4 Keyfob Paring
Mode
Enable Keyfob
Paring Mode
1 1
Disable Keyfob
Paring Mode
0 0
5 to 8 Passing Mode Controlled Bi-
direction
0 0000
Controlled
Entrance and
Prohibit Exit
1 0001
Controlled
Entrance and Free
Exit
2 0010
DS-K3G501 Series Tripod Turnstile Quick Start Guide
27