DS-K2800 Serial Access Controller
19
Chapter 5
Settings
5.1
Initializing the Hardware
Steps:
1.
The jumper cap jumps from Normal to Initial.
2.
Disconnect the power and restart the access controller, the controller buzzer
buzzes a long warning.
3.
After the buzzer stops, jump the jumper cap back to Normal.
4.
Disconnect the power and restart the access controller.
Figure 5-1
Initialization Dial-up
Note
:
The initializing of the hardware will restore all the parameters to the default
settings and all the device events are wiped out.
5.2
Relay Input NO/NC
5.2.1
Lock Relay Output
Lock Relay Normally Open Status
