• You can configure the shift in the Shift Management. For detailed information, see Shift
• By default, the system contains 32 departments.
• Press the up or down key on the keypad to change the input method.
Search Department
Search the target department by entering the department name.
Move the cursor to the Dept., and press OK to enter the department list.
Enter the department name in the search box, and press OK to start search.
Reset Department
Reset all parameters of the target department to the default ones.
Move the cursor to the Dept., and press OK to enter the department list.
Select a department from the list and select Reset, and press OK. All parameters will be reset to
default ones.
7.8.3 Shift Management
The normal shift and the man-hour shift are available to be configured. You can set the attendance
rule and the attendance checking times in the normal shift. You can also set the working hours per
day in the man-hour shift.
Normal Shift: It is applicable to the normal attendance situation.
Man-Hour Shift: It is applicable to the situation with flexible working hours.
Set Attendance Rule for Normal Shift
Move the cursor and select Shift → Normal → Rule , and press OK to enter the Rule page.
DS-K1T804B Series Fingerprint Access Control Terminal User Manual
39
