5
2.
Connect the cables between
controller and card reader. For
details, refer to 3.2 Wiring
Cables.
3.
Buckle the card reader up to the
plate with aligning C point and
the corresponded slot on the
upper side of card reader .
4.
Press the lower side of the card
reader to fasten the card reader
on D point of the plate.
Chapter 4
Sound Prompt and Indicator
After the card reader is powered on, LED status indicator will turn
green and blink for 1 time. Then it will turn red and blink for 3
times. At last the buzzer will send out a beep sound indicating the
starting up process is completed.
During using the card reader, it will send out different sounds
prompt and the LED indicator on it have different statuses. You
can refer to tables below for detailed information.
Table 4-1
Description of Prompt Sound
Sound Prompt
Description
One slow beeps
Press The key, or swipe card
Continuous beeps
Unencrypted card reader
Two rapid beeps
Valid card operation, including pressing
keys or swiping card.
Three slow beeps
Invalid card operation, including pressing
keys or swiping card.
Table 4-2
Description of LED Indicator
