HIKVISION DS-K1201A Series, Руководство пользователя

Страница: 9 / 15

DS-K1201 Fingerprint Card Reader
2
Chapter 2
Installation
2.1 Introduction for DIP Switch
The DIP switch module is shown below. The No. of DIP switch from left to right is 1
to 4, representing the RS-485 address.
Figure 2-1 DIP Switch Module
Table 1-2 Description of DIP Switch
Icon Description
1 Represent ON in binary mode
0 Represent OFF in binary mode
For example, the binary value of the following status is 1100.
Figure 2-2 DIP Switch Module
Note: The DIP switch of RS-485 address should reach the access control devices
requirements. For different access control devices, the DIP switch addresses may be
different.
2.2 Definition of Cable
The description of 5 cables is shown below.
Table 1-3 Description of Cables
Color Description
Blue RS-485 -
Yellow RS-485 +
Red PWR (DC +12V)
Black GND (Power Grounding)
Black GND (RS-485 Grounding)