HIKVISION DS-IE1024-03U/BA, Быстрый старт

Страница: 10 / 12

Recognition Server Quick Start Guide
9
Step 3 Use M5 × 10 screw to secure the rear end of outer rails to the rack.
Step 4 Pull out the rear of the outer rail, adjusting the length until it fits the rear column.
Step 5 Hang the hooks of the rear portion of the outer rail onto the slots on the rear of the rack.
Use M5 × 10 screw to secure the rear of the outer rail to the rear of the rack.
Step 6 Repeat the above the steps to fix the other outer rail.
Figure 2-2 Install Outer Rails
2.3.3 Installing Server into a Rack
Before you start:
Confirm that the inner rails are properly installed on the chassis and the outer rails are correctly
installed on the rack.
Step 1 Align the chassis inner rails with the front of the outer rails.
Step 2 Slide the server into the rear of the rack along the outer rail.
Step 3 Fix the server and outer guide rail with screws.