Network Video Recorder Quick Start Guide
12
2.2.2
DS-96000NI-I24(/H) Series
Purpose:
The following section introduces the HDD installation for the DS-96000NI-I24(/H) series NVR.
Steps:
1.
Unlock the front panel with the panel key.
Figure 2. 6
Unlock the Panel
2.
To remove the cover from front panel, operate following steps:
1)
Slightly pull the cover out of the device along the direction arrow
①
and make it a little above the left
handle. The angle between the cover and the front panel must be within 10
°
.
2)
Pull the front panel out of the device along the direction arrow
②
.
Handle with care to avoid damage.
Figure 2. 7
Remove the Cover
3.
Press the blue button to pop up the handle and hold the handle and pull the hard disk box out of the slot.
Figure 2. 8
Pull out Slot
