HIKVISION DS-9000 Series, Руководство пользователя

Страница: 81 / 137

User Manual of DS-9000/9100/9600 Series DVR
80
Note:
Time synchronization interval has a range of 0-10080min, normally 60min. If the DVR is used on a
public network, you should use a NTP server that has a time synchronization function, such as the server at the
National Time Center (IP Address: 210.72.145.44). If the DVR is setup in a more customized network, NTP
software can be used to establish a NTP server used for time synchronization.
Configuring a Remote Alarm Host
With a remote alarm host set, the DVR will send a signal to the host when an alarm is triggered. The remote alarm
host must have the Network Video Surveillance software installed.
To set up a remote alarm host:
1. Enter Network settings menu by clicking Menu > Settings > Network.
2. Select the Advanced tab.
3. Click the Set button next to Host/Others to enter the Host/Others menu, as shown in Figure 9.
Figure 9. Host/Others Menu
4. Enter Alarm Host IP and Alarm Host Port . Alarm Host IP is the IP of the remote PC which
has the Network Video Surveillance software installed. The Alarm Host Port must be the same
as software’s alarm monitor port (default port is 7200).
Configuring Multicast
Setting up multicasting solves limitation issues when streaming videos through a network access device. A
multicast address spans the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is suggested that the IP address
range of 239.252.0.0 to 239.255.255.255 be used.
To set up multicasting:
1. Enter the Network Settings menu by clicking Menu > Settings > Network.
2. Select the Advanced tab.
3. Click the Set button next to Host/Others to enter the Host/Others menu.
4. Set Multicast IP , as shown in Figure 10. When adding a device to the Network Video
Surveillance software, the multicast address must be the same as the DVR’s multicast IP.