User Manual of DS-8104HMI-A(/XX) Series Mobile Net DVR (V1.20.00)
49
If you have directly connected the positive pole of DVR KEY to vehicle battery (Please refer to section 2.3.3), you can also select auto work function.
The auto work time can be set in “Boot & Halt” menu. The device will auto power on/off according to the setup time.
Auto Work:
“√”means start the auto work function. Press [EDIT]to switch.
Date:
the auto work setup is set by day; you can copy the schedule to the other days.
Period 1, Period 2:
you can set two auto work periods for one day. The periods cannot overlap.
Copy to, Copy:
the settled time can be copied to other days.
Note:
1.
After auto halt of device, if user need to boot it again, please disconnect “KEY” and reconnect it before booting the device.
2.
When booting the DVR beyond the auto on/off time, if there is no operation or user login in 5 min, the device will auto halt.
5.8.2
GPS Setup
DS-8104HMI-M supports build-in GPS module. When using the DVR with GPS module, please
connect antenna correctly (details please refer to section 2.3). When receiving GPS signal, it
starts positioning function.
Note: To ensure the GPS module works effectively, please put the antenna on car roof or under
windshield glass and make sure it is not be shielded.
Time correct:
“
“means the GPS time correction is enable. You can choose the
corresponding time zone. (The default time zone is GMT+08:00, Range: GMT+12:00 to
GMT-12:00) When the GPS signals are received, the system will correct time every 5 mins.
Speed Unit, Max Speed:
“Speed Unit” and “Max Speed” is used to control the vehicle’s
speed by GPS information. You can set a maximum speed and setup warning handle method in “Exceptions” menu. When the vehicle is over-speed, the DVR
will trigger the alarm. (Please refer to section 5.7) The speed unit has two options: KPH/MPH. The default max speed is 100KPH and 62MPH, this can be
modified.
Display Channel:
You can set whether the GPS information display on each channel. “
“means the selected channel will display the GPS information including
the latitude, longitude, speed of the vehicle.(Please refer to section 4.2)
Fig.5.28
