Network Video Recorder User Manual
120
Step 3
Select a Camera to configure.
Step 4
Check Enable Region Entrance Detection.
Step 5
Optionally, check Save VCA Picture to save the captured pictures of region entrance
detection.
Step 6
Select Target Detection as Human Body or Vehicle.
Human Body: Discard non-human body pictures and videos which are not triggered by region
entrance detection.
Vehicle: Discard non-vehicle pictures and videos which are not triggered by region entrance
detection.
Step 7
Follow the steps to set the detection rules and detection areas.
1)
Select an Arming Region to configure. Up to 4 regions are selectable.
2)
Drag the sliders to set Sensitivity.
Sensitivity: The higher the value is, the more easily the detection alarm can be triggered.
Its range is [0-100].
3)
Click Draw Region and draw a quadrilateral in the preview window by specifying four
vertexes of the detection region.
Step 8
Configure Arming Schedule and Linkage Action.
Step 9
Click Apply.
12.7 Region Exiting Detection
Purpose
Region exiting detection function detects objects that exit from a pre-defined virtual region.
Step 1
Go to System > Event > Smart Event.
Step 2
Click Region Exiting.
