HIKVISION Ds-7604ni-e1, ds-7608ni-e1 Скачать руководство пользователя страница 127

Страница: 127 / 248

Network Video Recorder User Manual

126

8.5

Handling Exceptions Alarm

Purpose:

Exception settings refer to the handling action of various exceptions, e.g.

•

HDD Full:

The HDD is full.

•

HDD Error:

Writing HDD error or unformatted HDD.

•

Network Disconnected:

Disconnected network cable.

•

IP Conflicted:

Duplicated IP address.

•

Illegal Login:

Incorrect user ID or password.

•

Record Exception:

No space for saving recorded files.

•

PoE Power Overload:

The power consumption of the connected cameras via the PoE interface exceeds the

maximum PoE power.

PoE Power Overload is only supported by DS-7600NI-E1/4P, DS-7600NI-E2/8P and DS-7700NI-E4/P series

NVR.

Steps:

Enter Exception interface of System Configuration and handle various exceptions.

Menu> Configuration> Exceptions

Please refer to

Chapter 8.6 Setting Alarm Response Actions

for detailed alarm response actions.

Figure 8. 13

Exceptions Setup Interface

Содержание Ds-7604ni-e1, ds-7608ni-e1

























































































































































































































































Результаты поиска

Содержание Ds-7604ni-e1, ds-7608ni-e1

Отзывы:

Бренды по названию

Популярные бренды

HIKVISION Ds-7604ni-e1, ds-7608ni-e1, Руководство пользователя

Результаты поиска

Содержание Ds-7604ni-e1, ds-7608ni-e1

Отзывы:

Бренды по названию

Популярные бренды