First Choice For Security Professionals
6. Recording
To Setup Recording Schedule:
You can set the recording schedule through two ways:
OPTION1:
Right click to access the menu. Select Start Recording from
the list, select either Continuous Record or Event Record.
This will apply a 24/7 recording for all active channels.
OPTION2:
1. Enter the
Schedule Configuration
menu by going
to
Main Menu
>
Recording Configuration
>
Schedule.
2. Select a camera to configure from the camera
drop-down list.
3. Check the
Enable Schedule
checkbox to enable the recording schedule. If the checkbox is
unchecked, the recording schedule will be disabled.
4. Click blue Continuous or yellow Event icon bellow time table to select recording type. Time
table will switch to editable mode, drag mouse over time table to configure recording
schedule. Different recording types will be marked with corresponding color.
5. Step 4 scheduling adjustments made to the hour, if recording schedule requires
adjustments to the minutes, move to Step 7.
6. Select Recording Type for each day of the week.
Recording type
includes
Continuous
for
continuous recording or
Event
for recording when an event is triggered (i.e. from detected
motion) for the selected time period.
7. Select the start and stop time for each day of the week. The start and stop time are listed
using a 24 hr cycle (i.e. 18:00 is equivalent to 6:00pm)
8. Check the
Enable Audio Output
checkbox by going to
Main Menu > System
Configuration > Live View > General
if you would like to enable audio recording along
with the video. Audio can only be recorded if an amplified audio source is connected to the IP
camera.
9. Select the
Apply
button to save the schedule settings and click to return to the
previous menu. Clicking without clicking
Apply
will go out of the menu without saving
settings.
NOTE: Event recordings are recordings that are triggered from motion detection
and/or from an external alarm.
www.hikvisionusa.com
