manualshive.com logo in svg

HIKVISION DS-7600NI-K1/4G Series, Руководство пользователя

Поделиться
Скачать
HIKVISION DS-7600NI-K1/4G Series Скачать руководство пользователя страница 84

Thermal Camera Detection

The device supports the event detection modes of thermal network cameras: fire detection,

temperature detection, etc. You can configure the arming schedule and linkage actions of the

selected event.
Before You Start

Add a thermal network camera to your device and make sure the camera is activated.
Steps

1. Go to Configuration → Event → Smart Event .

2. Select a thermal camera detection event.

3. Set Camera.

4. Set the arming schedule. Refer to Configure Arming Schedule for details.

5. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.

6. Click Apply.

6.4.3 Configure Arming Schedule

Steps

1. Click Arming Schedule.

2. Choose one day of a week and set the time segment. Up to eight time periods can be set within

each day.

Note

Time periods shall not be repeated or overlapped.

Figure 6-26 Set Arming Schedule

3. Click Apply.

Network Video Recorder User Manual

71

Содержание DS-7600NI-K1/4G Series

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды