HIKVISION DS-7600 Series Скачать руководство пользователя страница 88

Страница: 88 / 236

User Manual of DS-9600/8600/7700/7600 Series NVR

Click

to change it to

to unlock the file and the file is not protected.

Figure 5. 32

Unlocking Attention

Protect file by setting HDD property to Read-only

Steps:

Enter HDD setting interface.

Menu> HDD

Figure 5. 33

HDD General

Click

to edit the HDD you want to protect.

Figure 5. 34

HDD General- Editing

Note:

To edit HDD property, you need to set the storage mode of the HDD to Group. See

Chapter Managing HDD Group.

Set the HDD property to Read-only.

Click

to save settings and back to the upper level menu.

Notes:

You can’t save any files in a Read-only HDD. If you want to save files in the HDD, change

the property to R/W.

If there is only one HDD and is set to Read-only, the NVR can’t record any files. Only live

view mode is available.

If you set the HDD to Read-only when the NVR is saving files in it, then the file will be

Содержание DS-7600 Series













































































































































































































































Результаты поиска

Содержание DS-7600 Series

Отзывы:

Бренды по названию

Популярные бренды

HIKVISION DS-7600 Series, Руководство пользователя

Результаты поиска

Содержание DS-7600 Series

Отзывы:

Бренды по названию

Популярные бренды