HIKVISION DS-7300HFI Series, Руководство пользователя

Страница: 21 / 202

User Manual of DS-7300HI/7300HFI/8100HDI-ST Series DVR
20
11 PREV Button Same as the PREV button on front panel.
12 DIRECTION/ENTER
Buttons
Same as the DIRECTION/ENTER buttons on front panel.
13 PTZ Button Same as the PTZ button on front panel.
14 ESC Button Same as the ESC button on front panel.
15 RESERVED Reserved for future usage.
16 F1 Button Same as the F1 button on front panel.
17 PTZ Control Buttons Buttons to adjust the iris, focus and zoom of a PTZ camera.
18
F2 Button
Same as the F2 button on front panel.
Troubleshooting Remote Control:
Note: Make sure you have install batteries properly in the remote control. And you have to aim the remote control
at the IR receiver in the front panel.
If there is no response after you press any button on the remote, follow the procedure below to troubleshoot.
Steps:
1. Go into Menu > Settings > General > More Settings by operating the front control panel or the mouse.
2. Check and remember DVR ID#. The default ID# is 255. This ID# is valid for all IR remote controls.
3. Press the DEV button on the remote control.
4. Enter the DVR ID# from step 2.
5. Press the ENTER button on the remote.
If the Status indicator on the front panel turns green blue, the remote control is operating properly. If the Status
indicator does not turn green blue and there is still no response from the remote, please check the following:
1. Batteries are installed correctly and the polarities of the batteries are not reversed.
2. Batteries are fresh and not out of charge.
3. IR receiver is not obstructed.
If the remote still can’t function properly, please change the remote and try again, or contact the device provider.
alarm shop