HIKVISION DS-7208HWI-SV series Скачать руководство пользователя страница 85

Страница: 85 / 241

User Manual of Digital Video Recorder

that the file is locked.

Click the icon

to unlock the file and the file is not protected.

Figure 5. 45

Unlocking Attention

Task 2: Protect file by setting HDD property to Read-only

Note:

To edit HDD property, you need to set the storage mode of the HDD to Group. See

Chapter 11.4

Managing HDD Group.

Steps:

Enter HDD setting interface.

Menu> HDD

Figure 5. 46

HDD General

Click

to edit the HDD you want to protect.

Figure 5. 47

HDD General- Editing

Set the HDD to Read-only.

Click

to save settings and back to the upper level menu.

Notes:



You can’t save any files in a Read-only HDD. If you want to save files in the HDD, change the property to

R/W.



If there is only one HDD and is set to Read-only, the device can’t record any files. Only live view mode is

available.



If you set the HDD to Read-only when the device is saving files in it, then the file will be saved in next

R/W HDD. If there is only one HDD, the recording will be stopped.

Содержание DS-7208HWI-SV series


















































































































































































































































Результаты поиска

Содержание DS-7208HWI-SV series

Отзывы:

Бренды по названию

Популярные бренды

HIKVISION DS-7208HWI-SV series, Руководство пользователя

Результаты поиска

Содержание DS-7208HWI-SV series

Отзывы:

Бренды по названию

Популярные бренды