![HIKVISION DS-7200-S Series Скачать руководство пользователя страница 6](http://html.mh-extra.com/html/hikvision/ds-7200-s-series/ds-7200-s-series_quick-operation-manual_2132326006.webp)
DS-8100/7300/7200-S Series DVR Quick Operation Guide
5
Front Panel
DS-8100-S Front Panel
1.
Power Button:
Powers DVR on/off.
2.
IR Receiver:
Receiver for IR remote.
3.
USB Interfaces:
Universal Serial Bus (USB) ports for additional devices such as USB mouse and
USB Hard Disk Drive (HDD).
4.
Status Indicators:
Status indicators for different features of the DVR.
•
Alarm:
Alarm indicator turns red when a sensor alarm is detected.
•
Ready:
Ready indicator turns blue when DVR is functioning properly.
•
Status:
Status indicator turns blue when DVR is controlled by an IR remote. Indicator turns red
when controlled by a keyboard and purple when IR remote and keyboard is used at the same
time.
•
HDD:
HDD indicator blinks red when data is being read from or written to HDD.
•
Modem:
Reserved.
•
Tx/Rx:
Tx/Rx indictor blinks blue when network connection is functioning properly.
•
Guard:
Guard indicator turns blue when the device is armed, off when the device is unarmed.
The arm/disarm state can be initiated by pressing and holding on the ESC button for more than 3
seconds in Preview mode.
5.
Channel Status LED Indicators & Alphanumeric Buttons:
•
Corresponding channel status indicator lights in blue when recording is functioning, red when
network is functioning and orange when recording and network are both functioning.
•
Alphanumeric buttons are used in various menus of the DVR, including: Switching to the
corresponding channel in Preview or PTZ Control mode; Inputting numbers and characters in
Edit mode; Switching between different channels in Playback mode.
6.
Control Buttons:
•
ESC Button:
The ESC button is used to escape to the previous menu and to arm/disarm the DVR
in Preview mode.
•
REC/SHOT Button:
The REC/SHOT button is used to enter the Manual Record interface. If
used when controlling a PTZ, pressing the REC/SHOT button and then a Numeric button will
call a PTZ preset.
•
PLAY/AUTO Button:
The PLAY/AUTO button is used to enter the Playback menu. It is also
used to turn audio on/off in the Playback menu and auto scan in the PTZ Control menu.