HIKVISION DS-7100HVI-SL Series Скачать руководство пользователя страница 136

Страница: 136 / 143

User Manual of DS-7100HWI/HVI-SL Series DVR

135

•

Operator:

The

Operator

user level has permission of Local Log Search in Local Configuration,

Remote Log Search and Two-way Audio in Remote Configuration and all operating permission in

Camera Configuration.

•

Guest:

The Guest user has permission of Local Log Search in Local Configuration, Remote Log

Search in Remote Configuration and only has the local/remote playback in the Camera Configuration.

User’s MAC Address:

The MAC address of the remote PC which logs onto the device. If it is configured

and enabled, it only allows the remote user with this MAC address to access the device.

Click the

button to save the settings and go back to the User Management interface. The added new

user will be displayed on the list.

Figure 12.6 Added User Listed in User Management Interface

Select the user from the list and then click the

button to enter the Permission settings interface.

Figure 12.7 User Permission Settings Interface

Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for

the user.

Local Configuration

•

Local Log Search: Searching and viewing logs and system information of device.

•

Local Parameters Settings: Configuring parameters, restoring factory default parameters and

importing/exporting configuration files.

•

Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD

Содержание DS-7100HVI-SL Series
















































































































































Результаты поиска

Содержание DS-7100HVI-SL Series

Отзывы:

Бренды по названию

Популярные бренды

HIKVISION DS-7100HVI-SL Series, Руководство пользователя

Результаты поиска

Содержание DS-7100HVI-SL Series

Отзывы:

Бренды по названию

Популярные бренды