HIKVISION DS-6001FI, Руководство пользователя

Страница: 18 / 26

User Manual of Embedded Decoder Server
- 18 -
Chapter 4 Upgrade Firmware
There are two methods to upgrade the Decoder firmware. One is using shell commands to ask
Decoder to download firmware from FTP server. The other is using PC client software.
4.1 Use Shell Command and FTP Server
1. Using DTE cable to connect the RS232 of Decoder with the RS232 of PC.
2. Setup the Hyper Terminal correctly and run it.
3. Make sure the FTP Server (wftpd32.exe) is setup correctly (the corresponding user
manual is in CD) and run it.
4. Make sure the network between Decoder and PC is ok.
5. Press "ctrl" and "u" keys of the PC keyboard, do not release them.
6. Switch off and on the power supply of decoder.
7. In the HyperTerminal, the following sentence is appeared:
Please input [u/U] or [ESC] key
8. Release "ctrl" and "u" keys, press "u" key
9. After that, please refer to following pictures.