8
Chapter3 Parameters Configuration
After hardware installation, firstly some network parameters of the server need to be configured, and
then the video parameters configuration through client software.
3.1 Network Parameters Configuration
The parameters which need DS-6001DI decoder to configure are including: Decoder IP address,
Subnet mask, Port, etc. You can configure them by Windows Hyper Terminal or NetTerm software.
Decoder IP address is mainly configured by Hyper Terminal or RS-232 serial, the default IP address
of DS-6001DI is 192.0.0.64. If the decoder IP address is unknown, you can only configure it by Hyper
Terminal or NetTerm (serial ports connection is needed). More details are as below:
Please direct connect the RS-232 serial of PC with the RS-232 serial of DS-6001DI decoder before
configuration.
3.1.1 Hyper Terminal Setup
Step 1: Enter Hyper Terminal.
Click “Start”
“Programs”
“Accessories”
“Communications”
“Hyper Terminal” in Windows
system, and the dialogue box below will appear:
Step 2: Name the connection title and define the icon.
Input a name (e.g. aa), select an icon; press “OK”, and the connection dialogue box will appear.
Step 3: Select the communication port.
Select “com1” communication port shown as above, press “OK”, the dialogue box will appear as
below.
