Hikvision Technical Manual
©2006 – 2010 by HIKVISION. All rights reserved.
9
Chapter 4 Driver Installation
To install the card to your PC, please kindly follow these steps below:
1. Insert the card into an empty PCI slot.
2. Turn on your PC and start Windows.
3. Windows Hardware Wizard detects this newly installed card and appears
automatically. Please ignore the wizard window and keep on the following steps.
4. Locate to the folder of DS-40xxHCI Driver, run the Driver Install.exe, and then the
Driver Install dialog box will be displayed as below:
5. Click ―Install or Update Driver
‖
to install/update the driver, and a Windows dialog
box will popup as below :
6. Click ―Continue Anywa
y‖
to continue the hardware installation. If there is more than
one card inserted in the PC or more than one DSP in one card, the operation system
will remind you of repeating the above process.
7. When the installation is done, this message will appear: Driver Installed
Successfully!