HIKVISION DS-4 Series Скачать руководство пользователя страница 31

Страница: 31 / 51

Technical Manual

int iSlowMotionDetectFps frame interval of low speed motion detection (>13) , the

value of 0 is means there is no need of low speed motion

detection

Explanation:

To adjust motion synthesize sensitiveness, and can adjust the sensitiveness of motion

detection dynamically during encoding. It also decides the sensitiveness of whole DSP

motion synthesizes. It is different from the parameter iThreshold of MotionAnalyze function,

the latter mainly used in analyzing some area‘s motion by host computer. The grade 0 is the

most sensitive and grade 6 is the most insensitive. The recommended value is 2;

Notes: The adaptive function described below is invalid in DS-42xx card.

Please compare the parameter iGrade and 0x80000000 with the OR operator

(iGrade|0x80000000), then the new algorithm will be adopted .With the new algorithm,

the precision of motion detection is greatly improved

Return value:

0—success; -1 – failed;

4.2.51.

int SetupMotionDetection(int channelHandle, RECT *rectList, int iAreas) ;

Parameter:

int channelHandle channel handle

RECT *rectList rectangle array

int iAreas number of rectangle

（

The Max value is 100

）

Explanation:

Set motion detection areas. When receive the data frame of marcblock‘s movement

information (PktMotion Detection), call function MotionAnalyzer which can analyze every

needed detection areas that is set by SetupMotionDetection. If the threshold of some areas

(iThreshold in MotionAnalyzer function) is reached, the finally result will be marked in

returned array (iResult in MotionAnalyze function); the rectangle range of DS-40xxHCI is

(0, 0, 703, 575).

Return value:

0—success; -1 – failed;

4.2.52.

int StartMotionDetection(int channelHandle);

Parameter :

int channelHandle channel handle

Explanation:

To startup motion detection. Motion detection information can be transmitted by data stream.

When we find the frame type is PktMotionDetection we can use MotionAnalyze function to

analyze the movement information, and the result is returned by parameter iResult in

MotionAnalyzer. We can also analyze by ourself according to the data format given by the

SDK refer to section 2.5 for the motion information format;

Notes: Motion detection and the encoding are independent from each other; the user program

can run motion detection under the condition of no running encoding program.

Return value:

0—success; -1 – failed;

Содержание DS-4 Series



















































Результаты поиска

Содержание DS-4 Series

Отзывы:

HIKVISION DS-4 Series, Руководство пользователя, Страница: 31 / 51

Результаты поиска

Содержание DS-4 Series

Отзывы: